How To Fix iphone xs max won’t turn on – There are two main reasons why the iPhone suddenly dies and does not want to live. It is possible to experience some random software errors that cause the power system to fail. In worse scenarios, the phone might not be able to be turned on because of hardware damage. Power problems associated with hardware damage often occur between wear symptoms on previous devices because hardware components typically depreciate with age.
However, the new device is not completely exempt from such deficiencies especially with accidental falls or accidental fluid exposure. But before opting for a service, there are a number of solutions that you can try to rule out software related factors from the underlying causes and fix the problem on your part. Highlighted below are the solutions that apply to similar problems on the new iPhone XS Max which suddenly doesn’t want to live. Feel free to refer to these steps when needed.
How To Fix iphone xs max won’t turn on
However, if you are looking for a solution to a different problem, visit our troubleshooting guide because we have discussed the most common problems with this phone. Find problems that are similar to yours and use the solutions we recommend. If they don’t work for you or if you need further assistance, don’t hesitate to contact us through our iPhone problem questionnaire.
1. Charge your iPhone.
The obvious reason why your iPhone won’t die is because the iPhone can run out of power and therefore needs to be recharged. Therefore, charging your iPhone should also be considered among the first possible solutions to try.
If you use traditional charging, be sure to use the original charger or charger that Apple has provided for your cellphone. Even though other third-party chargers might work, chargers may not have the same power output as OEM chargers and can cause some charging problems. If you use a wireless base to charge your iPhone, be sure to use a compatible and credible Qi wireless charger for your iPhone XS Max.
Leave your iPhone charged and then you can begin to eliminate possible causes such as bad applications and other factors that might have triggered the cellphone to die suddenly.
Running an application that has been broken is usually the main cause. To rule out this, you can do a forced restart while your iPhone is charging. Here’s how to do it:
- Press and release the Volume Up button quickly.
- Press and release the Volume Down button quickly.
- Then, press and hold the Power button on the side of the phone and then release it when the phone enters the boot-up sequence.
Forcing a restart also helps to delete junk files from the phone’s internal memory which might cause the system to experience an error during the boot-up sequence and thus stop the phone from starting up.
3. Reset all settings on your iPhone.
Performing this reset is often helpful when dealing with software-related problems related to invalid settings and options that are not configured on the phone. If your iPhone starts acting after changing your iPhone settings, then the problem might be due to some incorrect configuration. In this case, you can try these steps to reset all settings, eliminate invalid options, and restore default values.
- From the Home screen, tap on Settings.
- Tap General.
- Scroll down to and tap Reset.
- Select the option to Reset all settings.
- If prompted, enter your device passcode.
- Then tap the option to confirm all reset settings.
When the reset is complete, your iPhone will restart automatically and then load default values and options. You must reconnect to Wi-Fi, set the wallpaper and pair it again with your Bluetooth accessory.
I hope we can help you fix problems with your device. We would appreciate it if you helped us spread the word, so please share this post if you feel helped. Thank you very much for reading!