How to fix iphone not receiving calls

iphone not receiving calls
iphone not receiving calls

How to fix iphone not receiving calls – if you are an iPhone user, and find it difficult to receive incoming calls, know that you are not alone. The reason, a number of other iPhone users also report the same problem.

It is known, there are hundreds of iPhone users who report difficulties when receiving incoming calls on Apple’s support service forum.

The disturbance in question is, the iPhone touch screen does not function for a few seconds when the device rings.

And due to these disturbances, a number of iPhone users also often fail to know who is calling to pick up incoming calls.

In fact, this problem first appeared in a consumer discussion forum on Apple’s official website. While the first complaint appeared in mid-December 2017.

In fact, a user claimed that he even exchanged his iPhone for a new unit. But the same problem still arises.

So, what’s the solution if the problems above occur on your favorite iPhone ?

How to fix iphone not receiving calls

Check iPhone settings

1. Activate your iPhone then deactivate Airplane mode. Then open “Settings” and restart Airplane mode. Then wait up to 5 seconds, then turn it off again.

2. Check the “Don’t Disturb” setting, then go to Settings> Don’t Disturb, and make sure it turns off / off.

3. Make sure no phone numbers are blocked. Go to Settings> Phone> Blocking and Call Identification.

4. See if “Call Forwarding” is activated. Then go to Settings> Phone> Call Forwarding, and make sure it is off / off.

Remove and reinsert the SIM card

If your iPhone has a SIM card, remove the SIM card. Then re-enter.

Check network settings

1. Reset network settings. To do this, go to Settings> General> Reset> Reset Network.

All current saved settings will be deleted, including the Wi-Fi password, preferred network, and VPN settings.

2. Try making or receiving a call from another location.

3. Switch to a different network band. To do this, go to Settings> Cellular> Cellular Data Options> Enable LTE. Then deactivate “Enable LTE, 4G, or 3G” (this choice will depend on the operator and device model).